Concrete Grinding & Surface Prep
Diamond grinding, crack repair, and slab correction. This is the part that decides whether a coating lasts.
What you are getting
Every coating we install starts here, and we also do prep as its own job for people who need a slab brought back. We run diamond grinders with vacuum dust collection to take the floor down past the sealed surface and open the pores so the coating has something to grab. Cracks get cut out and filled, spalled areas get rebuilt, and low spots get brought level. If a floor is going to fail, nine times out of ten it is because somebody skipped this step and rolled coating over a slick or dirty slab.
- Diamond grinding with dust collection
- Crack and joint repair
- Spall and low spot correction
- Available as a standalone job
What the job looks like start to finish
Free Estimate
Send photos or have us come look. You get a written price with the system spelled out and no pressure to book on the spot.
Grind & Repair
We diamond grind the slab to open the concrete, then cut out and fill cracks, rebuild spalls, and level low spots.
Build The System
Pigmented base coat goes down, then flake or quartz broadcast to refusal. Once it sets we scrape and vacuum the surface back flat.
Topcoat & Cure
A clear topcoat seals everything in. Before we start you will know exactly when you can walk on it and when you can park on it.
Get a straight price on your floor
Send a few photos or have us come look. Free written estimate, no pressure to book on the spot.